Heights Plumbing, Heating & Cooling installs showers and tubs for homeowners across North Jersey. That covers tub-to-shower conversions, new tubs, walk-in and curbless showers, replacement valves, and the drain and supply work that has to be right before any tile goes on.
We are family owned and operated and licensed under NJ Master Plumber Lic. #1221100. You get a firm price approved before work starts, phones are answered live 24/7, and financing is available through Synchrony. Where the town requires it, we pull the plumbing permit and schedule the rough inspection.
A Shower Is Only as Good as What Is Behind the Wall
Most shower and tub problems are set in place on installation day. A valve roughed too deep for the finished wall, so the trim never sits flush. A drain that does not line up with the pan. A tub set without a proper overflow connection. A pan pitched flat, so water sits in the far corner. None of it is visible once the tile is on, and all of it costs far more to fix afterward.
In older North Jersey homes, the supply lines add a second problem. Galvanized steel from the original build is often down to a fraction of its inside diameter, so a new valve is starved for water and pressure drops every time someone flushes a toilet. Putting a new shower on old, undersized piping is a common reason a remodel disappoints.
What Our Shower & Tub Installation Service Includes
We set the rough valve at the correct depth for your wall finish, position the shower head, hand shower and body sprays where you want them, and rough the drain to match the tub, base or pan going in. Pressure-balance and thermostatic valves are both options, and we explain the difference before you choose. Tub drains and overflows are assembled and tested, and for a tub-to-shower conversion we rework the drain and valve for the new footprint.
For tile showers we handle the plumbing side of the pan: drain body, linear or center drain, and the connection below, coordinated with your tile contractor so the pan and drain meet correctly. Curbless and low-threshold showers get the drain and floor planning they need to actually drain. If we find galvanized or undersized supply lines while the wall is open, we tell you and price the replacement right then.
Reasons Homeowners Replace a Shower or Tub
- Cracked or leaking tub or fiberglass shower base
- Converting a bathtub into a walk-in shower
- Shower temperature swings when other fixtures run
- Water pressure at the shower has dropped over time
- Grout or tile leaking into the ceiling below
- Valve trim is corroded, stiff or no longer made
- Stepping over a tub wall has become a fall risk
- Adding a second bathroom or a tub for a growing family
Noticing any of these? Call (201) 245-7772 or request service online. Same-day appointments across North Jersey.
Our Shower & Tub Installation Process
Look at the bathroom and the piping
We check the existing valve, drain, supply lines and the framing under and behind the fixture, and go over the tub, base or pan you have picked out.
Firm price and permit
You get a written scope and a firm price approved before work starts. Where the town requires it, we pull the plumbing permit and schedule the rough inspection.
Remove and rough in
The old tub or shower comes out, and the new valve, supply lines and drain are set to the exact specifications of the fixture going in.
Set the fixture and test
The tub, base or pan drain is installed and connected, the valve and drain are water tested, and the rough inspection is met before the walls close.
Trim out after finish
Once the tile or surround is complete we install the valve trim, shower head, spout, drain cover and any hand shower or body sprays, and test the whole assembly with you.
Shower & Tub Installation Services We Offer
Tub-to-shower conversion
Removing a bathtub, relocating the drain and reworking the valve for a walk-in shower base or tiled pan.
New tub installation
Alcove, drop-in and freestanding tubs, with the drain, overflow and filler roughed and set for the specific model.
Shower valve replacement
Pressure-balance or thermostatic valves installed at the correct depth, including swapping a worn two- or three-handle setup for a single valve.
Curbless and low-threshold showers
Drain placement and floor planning for showers with no curb or a low step, coordinated with the tile contractor.
Shower pan and linear drain plumbing
Drain bodies, linear drains and the connections below the pan for tiled showers, tested before the pan is finished.
Supply line replacement during the job
Replacing galvanized or undersized supply lines feeding the shower or tub while the wall is already open.
Why Choose Heights for Showers & Tubs
- Family Owned & Operated: A family business means more personalized service than you get from big chain providers.
- 56 Years of Industry Experience: Over 56 years of combined industry experience across plumbing, heating and cooling.
- Licensed & Insured: NJ HVAC Lic. #197400 and NJ Plumbing Lic. #1221100. Fully insured for residential and commercial work.
- Engineers On Staff: Our own mechanical and electrical engineers design systems and handle wiring, so you don’t need a second contractor.
- Same-Day Service: Schedule with us and we’ll provide service within 24 hours, arriving on time as scheduled.
- Upfront Pricing: Straightforward pricing with no surprise fees or up-charges. You know what you’re paying before we start.
Showers & Tubs Across North Jersey
We provide showers & tubs from our offices in Fair Lawn and Hillsdale to homes and businesses in 12 North Jersey counties, with the same team and the same pricing everywhere:
- Bergen County
- Essex County
- Sussex County
- Passaic County
- Warren County
- Morris County
- Hudson County
- Union County
- Hunterdon County
- Somerset County
- Middlesex County
- Mercer County
Popular towns include Hackensack, Paramus, Ridgewood, Fair Lawn, Newark, Montclair, Vernon, Paterson, Phillipsburg, Parsippany-Troy Hills.
Showers & Tubs FAQs
What is the difference between a pressure-balance and a thermostatic valve?
A pressure-balance valve keeps the mix steady when pressure changes, such as when a toilet flushes. A thermostatic valve holds a set temperature and lets you control volume separately. Both work well, and we explain the trade-offs for your house before you choose.
Can you move the shower drain?
Usually, yes. It depends on the joist direction, the location of the vent and how far the drain has to travel. We look under the floor before promising a new location.
Do you do the tile work?
No. We handle the plumbing side, including the drain, valve, supply lines and the pan drain connection, and coordinate with your tile contractor so the two sides meet correctly.
Do I need a permit to replace a tub or shower?
It depends on the town and on whether piping is being moved or replaced. Where the local code office requires it, we pull the plumbing permit and schedule the rough inspection.
Why does my new shower have low pressure?
Most often the supply lines feeding it are old galvanized steel that has scaled shut inside, or the pipe is simply undersized. We check the supply before installing a new valve so this does not happen.
Is financing available?
Yes. Shower and tub installation can be financed through Synchrony, and we will go over the terms with you before anything is signed.